Social Recruitment

Provide a stage for making dreams come true for people working hard for their dreams.

Unlimited

Xuhui district, Shanghai

Minhang district ,Shanghai

Shanghai

Unlimited

R&D

MIND Intelligent Transportation – embedded software engineer

Location：

Xuhui district, Shanghai

Job type：

R&D

1.Be responsible for embedded software design, preparation and publish of on-board millimeter wave radar;
2.Coordinate closely with algorithm engineer, and be responsible for realizing transplantation and optimization of corresponding algorithms of on-board millimeter wave radar;
3.Participate in corresponding software test and verification.

1.Major in communication, electronics and computer and others, undergraduate and above;
2.Above 3 years of experience in development of automotive electronic embedded software;
3.Be equipped with robust C-language programming ability, be able to practically develop ARM or DSP system, practically grasp protocols such as UART, SPI, CAN and Ethernet;
4.Be familiar with UDS diagnosis specifications and Flash Bootloader process;
5.Good English reading proficiency, and be able to read and understand data manual of chip in English;
6.Those who have the experience in development of commonly used radar chip such as TI, NXP are prioritized;
7.Those who have related experience in AUTOSAR are prioritized;
8.Those who have related experience in serving for renowned automotive radar companies in the industry are prioritized;

Manager li：18502228553

Resume delivery email：ringxu@mind-ea.cn
MIND Intelligent Transportation – radar algorithm development engineer (radar signal processing direction)

Location：

Xuhui district, Shanghai

Job type：

R&D

1.Be responsible for simulation, development, testing and verification of 77GHz 4D millimeter wave radar signal processing algorithms;
2.Participate in design of overall plan of 4D millimeter wave radar, and complete design and development of algorithms such as radar wave design, constant false alarm testing and angle estimation.
3.Participate in realization, integration, testing and maintenance of radar signal processing algorithm code;
4.Coordinate joint debugging and testing and verification of radar products, analyze and localize related issues on radar signal processing algorithms;
5.Conduct preparation and filing of relevant documents.

1.Above postgraduate, be familiar with system and working principle of radar;
2.Be equipped with experience in development of FMCW and other relevant wave radar algorithms;
3.Be familiar with commonly used radar MIMO wave design and velocity ambiguity resolution algorithms, such as TDA-MIMO, FDA-MIMO and PDA-MIMO methods and their strengths and weaknesses;
4.Be familiar with commonly used radar signal processing algorithms, such as 2D-FFT, CFAR, DOA angle measurement algorithm;
5.Practically use C/C++/Matlab/Python and other programming languages to implement algorithm simulation, design and verification;
6.Those who have the experience in 24GHz or 77GHz related bulk production projects are prioritized.

Manager li：18502228553

Resume delivery email：ringxu@mind-ea.cn
MIND Intelligent Transportation – ADAS intelligent driving algorithm engineer

Location：

Xuhui district, Shanghai

Job type：

R&D

1.Be responsible for or participate in R&D and delivery of ADAS functional bulk production project, involving research and development, design, maintenance, optimization and restructuring and delivery to customers of horizontal (LDP, TJA, FCTA), vertical (AEB, ACC…), side or rear (BSD, LCA, RCTA, DOW...) and other ADAS functions;
2.Based on model-based development (MBD) of Matlab/Simulink modeling tool, participate in work such as horizontal and vertical functional development, maintenance of MBD tool chain and module maintenance;
3.Perform modular functional development work based on C/C++language, participate in work such as target integration, side alarm, vertical functional R&D and delivery;
4.Participate in MIL/SIL/HIL related testing, optimization and application of ADAS algorithms;
5.Participate in pre-research design and development work of frontier ADAS functions.

1.Undergraduate and above, major in computer, automation, electronic engineering and vehicle engineering and other majors;
2.Those who have the experience in development of ADAS and automatic driving functions are prioritized, and participated in delivery of bulk production projects are prioritized;
3. Be equipped with Matlab/Simulinkmodeling ability;
4. Be familiar with C/C++, and understand development thinking of modular development unit testing;
5.Those who are familiar with basic control algorithms are prioritized, such as PID/LQR/MPC and so forth.

Manager li：18502228553

Resume delivery email：ringxu@mind-ea.cn
MIND Intelligent Transportation –radar system design engineer

Location：

Xuhui district, Shanghai

Job type：

R&D

1.Be responsible for design and planning of 4D millimeter wave radar products, lead project and product planning, argue product design plan, and reasonably assign technical indicators of each sub-system to form implementable high-performance millimeter wave radar plan;
2.Be responsible for tackling core technology and resolving technical problems during R&D process.

1.Full-time undergraduate and above, and above 3 years of experience in radar signal processing;
2.Understand the development trend of millimeter wave radar, and be familiar with performance indicators and strengths and weaknesses of mainstream millimeter wave radar solutions;
3.Those who are equipped with bulk production experience in 77GHz millimeter wave radar are prioritized, and equipped with experience in TI, NXP platforms are prioritized;
4.Those who are equipped with the experience in R&D of radar software, antenna and algorithms are prioritized;
5.Those who are equipped with work experience in related industries such as development of automotive radar, civil radar and military radar are prioritized, who also are equipped with fine occupation quality and occupational conduct, work on own initiative, have strong anti-pressure ability, have forceful execution ability and sense of responsibility, and are guided by results.

Manager li：18502228553

Resume delivery email：ringxu@mind-ea.cn
MIND Intelligent Transportation – hardware engineer

Location：

Shanghai

Job type：

R&D

1.Implement design of schematic diagram of hardware, device type selection, simulation computing of electric parameters and output of corresponding design documents according to project plan;
2.Organize design review and set forth hardware optimization plan;
3.Carry out VAVE for project in bulk production, and set out cost-reduction development plan;
4.Coordinate LAYOUT engineer to complete and optimize device and module layout.

1.Postgraduate and 5 years and above work experience, electronics related major, be familiar with hardware development process of automotive electronics products, involving products including but not limited to: electronic gear shifter, electric driven opening and closing part, wireless charging module and so on;
2.Own digilogue circuit professional knowledge, can independently design hardware function module and simulation computing of relevant electric parameters;
3.Understand DFMEA and hardware function safety failure analysis process;
4.Be familiar with formation mechanism of EMI and EMS, be able to consider passing level of corresponding standard of EMC testing of the product.

Manager liu:15097420606
Manager ran:18231272822
Resume delivery email:xsyzp@mind-ea.cn
MIND Intelligent Transportation – embedded software development engineer

Location：

Minhang district ,Shanghai

Job type：

R&D

1.Be responsible for functional strategy and algorithm development of products such as electric tail wing, electric side pedal, electric vehicle windows;
2.Be responsible for analysis and resolution of problems of software products;
3.Be responsible for preparation of documents such as software design and commissioning;
4.Assist engineers of other departments to complete commissioning task of products;

1.Undergraduate, major in communication engineering, electronic engineering and vehicle engineering, above three years of work experience;
2.Be proficient in C-language, and has solid programming skills;
3.Be familiar with basic methods of electronic embedded software development of vehicles, understand ASPICE development process and be acquainted with functional safety concept;
4.Those who have the experience in development of AUTOSAR architecture are prioritized;

Manager zhang：15188608001

Manager wang：17336344691

Manager liu：15097420606

Manager ran：18231272822

Resume delivery email：xsyzp@mind-ea.cn
MIND Intelligent Transportation – basic software development engineer

Location：

Minhang district ,Shanghai

Job type：

R&D

1.Be responsible for architectural design of foundational drive software of products such as electric tail wing, electric side pedal and electric vehicle windows;
2.Be responsible for the development of drive of MCU and its peripherals;
3.Be responsible for the development of drive of ECU peripheral chip, sensors and DC brush motor;
4.Be responsible for building testing environment for the developed code, and writing testing cases;

1.Undergraduate, major in electronic information, communication engineering and automation, above three years of work experience;
2.Be familiar with the development of drive such as automotive electronic MCU, sensors and DC brush motor;
3.Be familiar with the basic methods of electronic embedded software development of vehicles, understand ASPICE development process and be acquainted with functional safety concept;
4.Own basic hardware knowledge, be able to read and understand schematic diagram of hardware, and be able to read chip manual in English;

Manager zhang：15188608001

Manager wang：17336344691

Manager liu：15097420606

Manager ran：18231272822

Resume delivery email：xsyzp@mind-ea.cn
MIND Intelligent Transportation – diagnosis communication engineer

Location：

Minhang district ,Shanghai

Job type：

R&D

1.Be responsible for communicating with customers, specify diagnosis demand, prepare failure diagnosis investigation form and create maintenance and diagnosis data library;
2.Implement configuration and creation of CAN/LIN diagnosis protocol stack software;
3.Based on product demand, perform UDS diagnosis service development, as well as realization of software related to diagnosis;
4.Be responsible for maintenance and secondary development of communication software;
5.Support analysis of troubleshooting and root cause analysis of products;

1.Undergraduate, major in communication engineering, electronic engineering and vehicle engineering, above three years of work experience;
2.Be familiar with CAN, LIN bus protocol;
3.Be familiar with related standards of diagnosis protocols such as ISO14229, ISO15765;
4.Be familiar with commonly used diagnosis development tools and have good problem analysis ability;

Manager zhang：15188608001

Manager wang：17336344691

Resume delivery email：xsyzp@mind-ea.cn
Thermal system – motor control algorithm engineer

Location：

Shanghai

Job type：

R&D

1.Be responsible for control and development of brushless motor product and implementing realization of software code;
2.Perform joint debugging with hardware, and realize electrical control to satisfy technical requirements;
3.Design development control strategy and algorithm;
4.Perform preparation of software design documents and static code testing, and provide code fixes according to effectiveness test and unit test of the product;

1.Be equipped with 5-10 years of experience in development of brushless motor algorithms;
2.Undergraduate and above;

Ying-ying liu:17532070210

Resume delivery email:liuyingying@mind-ea.cn
Electrical system – R&D engineer of high voltage connectors

Location：

Shanghai

Job type：

R&D

1. Be responsible for docking with OEM harness engineer, electronics appliance engineer and others to provide connector type selection support;
2. Understand customer demand and provide connector product solutions, be responsible for design and development, technical review, development time planning, risk management and milestone control of high-voltage connector products;
3. Conduct benchmark, competitiveness analysis and others of competitors’ products;
4. Perform preparation, release and cost evaluation of technical demand of outsourced manufacturing of components of the products;
5. Technical support, instructions and review of outsourced manufacturing of components of the products, progress, quality and risk control of outsourced manufacturing;
6. Analyze and resolve product development and after-sales issues, provide summary of experience, and establish product development database;
7. Be responsible for verification of product design and support in bulk production, and prepare files and documents related to accreditation of customers on products to promote customers’ approval to the products.

1.College and above, major in machinery, automobile, electronic and electromechanical, industrial engineering and automation;
2.3 years and above research and development experience in high-speed connectors in automobile industry (FAKRA, MINI FAKRA), those who have relevant work experience are prioritized;
3.Be equipped with good learning ability, communication ability, team collaborative ability, relatively strong logic analysis and judgment ability;
4.Practically use various office software and design software such as UG;
5.CET-4 is prioritized;

Manager chen:16682237708
Resume delivery email:mindhr @mind-ea.cn
Electrical system – R&D engineer of charging base

Location：

Shanghai

Job type：

R&D

1. Be responsible for docking with OEM harness engineer, electronics appliance engineer and others to provide type selection support in charging socket;
2. Understand customer demand and provide product solutions, be responsible for design and development, technical review, development time planning, risk management and milestone control of charging socket;
3. Conduct benchmark, competitiveness analysis and others of competitors’ products;
4. Perform preparation, release and cost evaluation of technical demand of outsourced manufacturing of components of the products;
5. Technical support, instructions and review of outsourced manufacturing of components of the products, progress, quality and risk control of outsourced manufacturing;
6. Analyze and resolve product development and after-sales issues, provide summary of experience, and establish product development database;
7. Be responsible for verification of product design and support in bulk production, and prepare files and documents related to accreditation of customers on products to promote customers’ approval to the products.

1.College and above, major in machinery, automobile, electronic and electromechanical, industrial engineering and automation;
2.Above 3 years of R&D design experience in new energy vehicles, and those who have relevant work experience are prioritized;
3.Be equipped with good learning ability, communication ability, team collaborative ability, relatively strong logic analysis and judgment ability;
4.Practically use various office software and design software such as UG;

Manager chen: 16682237708
Resume delivery email: mindhr @mind-ea.cn
Electrical system – R&D engineer in high-speed connectors

Location：

Shanghai

Job type：

R&D

1. Be responsible for docking with OEM harness engineer, electronics appliance engineer and others to provide connector type selection support;

2. Understand customer demand and provide connector product solutions, be responsible for design and development, technical review, development time planning, risk management and milestone control of high-voltage connector products;

3. Conduct benchmark, competitiveness analysis and others of competitors’ products;

4. Perform preparation, release and cost evaluation of technical demand of outsourced manufacturing of components of the products;

5. Technical support, instructions and review of outsourced manufacturing of components of the products, progress, quality and risk control of outsourced manufacturing;

6. Analyze and resolve product development and after-sales issues, provide summary of experience, and establish product development database;

7. Be responsible for verification of product design and support in bulk production, and prepare files and documents related to accreditation of customers on products to promote customers’ approval to the products.

1.College and above, major in machinery, automobile, electronic and electromechanical, industrial engineering and automation;
2.3 years and above research and development experience in high-speed connectors in automobile industry (FAKRA, MINI FAKRA), those who have relevant work experience are prioritized;
3.Be equipped with good learning ability, communication ability, team collaborative ability, relatively strong logic analysis and judgment ability;
4.Practically use various office software and design software such as UG;

Manager chen：16682237708
Resume delivery email：mindhr @mind-ea.cn

Z6·尊龙凯时

Social Recruitment